Home Range operator / administrator Getting started

FAQ

Frequently asked questions for Range operators and admins

Sort By

Newest
Most likes
Most views

How to get the host IP-address of the eHub

How to get the host IP-address of the eHub Select the eStatus application, marked with a red border. Expand the...

September 6th, 2022 607 views 0 likes
How to connect to eHub through internal eScoreNet

eScoreNet is the closed network for the eScore system only, securely connecting eScore equipment together. eScoreNet is available by wired...

September 6th, 2022 537 views 0 likes
How to connect to eHub trough local shooting range network?

Access to the eHub trough the local shooting range network Your PC or tablet, and eHub needs to be connected...

September 7th, 2022 540 views 0 likes
How to register and configure connected units?

All units are automatically identified by the system. But for eScore to know how many targets, antennas and shooter monitors...

September 7th, 2022 416 views 0 likes
How to assign lane numbers

In Settings->"Configure connected units", it is possible to register connected units and assign lane numbers to targets. Unregistered units For...

September 7th, 2022 520 views 0 likes
How to change language?

Click or tap the settings page. Click or tap "User preferences"to expand. Choose language from the drop-down list, and click...

September 7th, 2022 594 views 0 likes
How to configure and setup WinGPS Cloud?

Prerequisite You need an active WinGPS Cloud subscription to be able to use the WinGPS Cloud spectator view service available...

September 7th, 2022 712 views 1 likes
How to setup and configure and use target groups?

Introduction to target groups A target group is a set of multiple targets assigned to a specific shooting distance, each...

September 5th, 2024 96 views 0 likes