Gå inn på Systemoppdatering på nettiden til eHub

1. Automatisk nedlasting

Oppdateringer vil automatisk bli lastet ned i bakgrunnen fra internett dersom eHub er tilkoblet internett (WAN port på eHub)

1. Klikk Start oppgradering for å installere alle oppdateringer.
2. Etter at oppgradering er ferdig vil eHUb vanligvis start på nytt. NB: Ikke slå av eHub under omstart, omstarten kan ta 5-20 minutter avhengig av antall oppdateringer. 

2. Manuell nedlasting

På baner uten internet forbindelse kan en laste ned oppdateringsfiler fra internett og ta med disse på banen for å oppgradere.

1. Last ned de 3 oppgraderingsfilene (filene er passord beskyttet, send en epost til software@kongsberg-ts.no for å få tilgang):
   1. eScore-eHub-2022-Q4-Package-1.zip
   2. eScore-eHub-2022-Q4-Package-2.zip
   3. eScore-eHub-2022-Q4-Package-3.zip
2. På Systemoppdatering siden på eHub, velg Last opp og velg første fil. Repeter dette for alle 3 filene. NB: Det er viktig at alle filene lastes opp før oppgradering startes!
3. Klikk på Start oppgradering
4. Etter at oppgradering er ferdig vil eHUb vanligvis start på nytt. NB: Ikke slå av eHub under omstart, omstarten kan ta 5-20 minutter avhengig av antall oppdateringer. 

Release log

eHub

Features:

• Added support of eHub system info in eStatus (board info, memory, disk and network)

• Added download of physical target definition from eCloud to eHub 

• Robustify shooting program command execution. eControl now wait for long running commands and resend if necessary 

• Live spectator view: Spectator view of targets and ranking list (total integer or decimal score) of total competition or active relay. Ranking of total competition can also filter by a single class.

• All metric values for network units did always shown as “disconnected”, now fixed.

• Shows reboot dialog after system update and reload page after restart done

• Added status of WinGPS Cloud connection to status page

• Added WinGPS Cloud connection status in Cloud settings.

• Added WinGPS Cloud URL generator to link directly to customers page

• Updated to new KTS logo

• Added go back arrow in shotlog

• Added print score-cards button for training targets

• Added select all shots button during re-shooting

• Support of eHub info request message from units on WAN port

• Improved upgrade script to avoid corrupted container images

Fixes:

• When target reboots and monitor reconnect the eMonitors are set in correct locked mode state (before: if locked mode was set in eControl, the eMonitor would not be in locked mode after a target restart)

• Rebooting eHub now load targets in same state

• Importing competition setup (relays) from file now don’t add the same shooters multiple times in the shooter database

• When clicking the Next shooter action on a target in training, the dialog
  for selection of shooting program and target scoring definition was not launched.

• Added text wrap of shot counter text when number is big (not enough room)

• Target numbers in timeline (shot log) was wrong value and is now corrected

• Metrics when monitor or target is disconnected are greyed out to indicate lost connection

• Multiple target/firing line antenna now show correct status when disconnected

• Bug in zero-point alignment of target when previous calibration values are non-zero

• Fixed misaligned hit point on target view on target templates with picture and offset of rings (e.g Norwegian reindeer

eMonitor

Features:

• Support software upgrades for Android 11 devices

Fixes:

• Fixed misaligned hit point on target view on target templates with picture and offset of rings (e.g Norwegian reindeer)

• Fix orientation and rotation of screen to prevent screen from being locked in upside down position (e.q newer KTS Android 11 devices)

eTarget

Features

• Modify logic for main line action when navigating in a shooting program. If user navigate to a series that  has already been approved and the number of shots > 0, the main action will be Next series. If the series has not been approved, the main line action will be set to Start series.

• Improved support of long running commands like marking shots in a series

• A protection mechanism is required to avoid executing the same command multiple times e.g. caused by re-sending from eHub/eMonitor.

Fixes: 

• Corrected main line action when navigating to last series. When navigating to the last series in a shooting program, when this series has already been approved the main line action will now be set to loading shooting program.

• Overall status was not updated when sensor error disappeared